AIRCHAL offers a complete range for all Marine, Oil & Gas ventilation needs.

The high specification Air Handling Unit and Fans ranges with all of the functional sections needed to meet any air handling or extracting requirement.
AIRCHAL Air Handling Unit offers flexibility of function, size and process while the CC Clean Concept is a compact unit based on a new design platform specifically for the needs of this industry. That means we control quality, performance & accomplishment of the entire unit to ensure fast installation and good service.

Design

•  50-75 mm thick double-skin, rigid sheet, stone wool insulation
•  Fully enclosed panels
•  Fully demountable casing
•  Multi-section blocks to reduce site assembly time
• Corrosion resistant components designed for the maritime environment.
• Stainless steel casing available as a standard alternative.
• Painted casing available as an option.
• Taylor made marine functions.

• Client-specific application in compliance with process requirements
• High corrosion resistance

Applications

• Cruise Ships
• Ferries Ships
• Cargo and Naval Ships
• Products for Marine and Offshore

General

For industries at risk, Airchal offers ATEX air handling units.
The design of our devices guarantee the protection of persons and property, while avoiding ignition sources and electrostatic phenomena.
Clean Concept design fits all the requirements of the ATEX compliance.

Design

•  50-75 mm thick double-skin, rigid sheet, stone wool insulation
•  Fully enclosed panels
•  Fully demountable casing
•  Multi-section blocks to reduce site assembly time

Applications

ATEX DIRECTIVE 94/9/EC: EQUIPMENT

The ATEX Directive has been effective throughout the European Union since 1 July 2003, replacing the various existing national and European legislations regarding explosive atmospheres; after that date it has been possible to marketonly those products conforming to the directive and supplied with the ATEX CE marking and EC declaration of conformity. It applies to all the electrical and mechanical equipment intended for use in explosion hazard areas, ranking among the directives that allow free trade of the
goods and define the essential safety requirements (ESR) of the equipment which it covers. In particular, the directive defines the product categories and the characteristics the products must satisfy in order to be installed in explosion hazard areas.
It also describes the procedures that must be followed in order to obtain conformity.  The Directive’s field of application also extends to safety, control and regulation devices that are installed outside the potentially explosive area, but on which the safety of the
products installed in the explosive atmosphere depend.

PRODUCT CLASSIFICATION 

The directive includes mining and surface installation materials since the hazard, protective measures and test methods are similar for both materials. The primary distinction is made with the division of the materials into two groups.
• group I: products to be used in gassy mines
• group II: equipment intended for use on the surface. Directive 94/9/EC classifies the products in categories, in relation to the level of protection and based on the degree of riskiness of the environment where they will be installed. 

GROUP I PRODUCTS

The mining products are divided into 2 categories:
category M1: equipment or protective systems that guarantee a very high level of protection.
category M2: equipment or protective systems that guarantee a high level of protection; they must be able to be disconnected in the presence of the gas.

GROUP II PRODUCTS

The surface equipment (group II) is divided into 3 categories, based on the level of protection (zone of use); the categories are identified by the number 1, 2, 3 followed by the letter G (Gas) or D (Dust).
• category 1: equipment or protective systems that guarantee a very high level of protection.
• category 2: equipment or protective systems that guarantee a high level of protection. 
• category 3: equipment or protective systems that guarantee a normal level of protection. 

General

Pharmaceutical companies require precise control of temperature, humidity and air quality within research and development laboratories and manufacturing environments.

These dedicated custom air handling units shall be provided for conditioning and dehumidification of all designated preparation, and storage support rooms. The option of using an energy recovery device needs to be considered to help reduce energy consumption and utility cost in conditioning and dehumidifying the outside air.

AIRCHAL air handling solutions offer precise control of humidity and air quality within your pharmaceutical operations. Solution comprises air handling units, which can be totally customised and assembled directly on-site to suit your building requirements.

Design

• 50-75 mm thick double-skin, rigid sheet, stone wool insulation
• Fully enclosed panels
• Fully demountable casing
• Multi-section blocks to reduce site assembly time
• The highest level of hygiene design
• Easy, quick and complete cleanability
• Can be fully inspected from outside through mandatory large sight glasses and internal lighting

Applications

• Pharmaceutical development and production processes
• Extremely high demands on the involved air-handling and climate systems with regard to safety, precision, reliability, reproducibility, and durability.

General

Maintaining temperature and humidity in data centers is essential. For this Airchal offers innovative air conditioning systems in order to respect and to ensure reliable and stable operation. Airchal especially designed systems to optimize air in data centers. The Airchal systems offer a cost-effective, highly reliable and energy efficient solution.

Perfect data backup, and failure safe hardware are incontestable and precise therefore , efficient hardware cooling is a must.

Design

•  50-75 mm thick double-skin, rigid sheet, stone wool insulation
•  Fully enclosed panels
•  Fully demountable casing
•  Multi-section blocks to reduce site assembly time

• Operational and process safety
• Energy efficiency
• Precision of thermal air-handling
• Low operating costs due to optimised fan units
• Minimised pressure losses

Applications

• Data Rooms
• Data Center
• Data Meeting Rooms

General

The chemical industry, today is seen as one of the most important and strongest-growing sectors. Along with basic chemistry, specialized chemistry, and pharmaceuticals,  industrial sector, with and very high production volume into the world . All areas of the chemical process chain, from the laboratory through technical production, in the sectors of development, synthesis and analysis place extremely high demands on the design, function and durability of the involved air-handling-units.

Design

•  50-75 mm thick double-skin, rigid sheet, stone wool insulation
•  Fully enclosed panels
•  Fully demountable casing
•  Multi-section blocks to reduce site assembly time
• Durability and lasting quality

• Energy efficiency
• Operational and process safety
• Free and complete access to all functional units and components through operating doors

Applications

• Recover heat and cooling energy
• Secure air filtration
• Reduce particles
• Control contamination and
• Treat and transport air

General

Since some years, the trend is toward alternative energy, wind energy and new technologies. The coal plants are disappearing one after the other. But nuclear power is still the most reliable, and new projects are emerging. Airchal is a major player in the industrial air cooling for nuclear plants. We provide air handling units for the direct or indirect air used in power plants and we have developed a dedicated product to nuclear processing. Airchal has referenced a nuclear power plant that meets the highest standards and can withstand earthquakes.AIRCHAL has a dedicated anti seismic air handling unit product line.

Design

• Strengthened  frame
• 50-75 mm thick double-skin, rigid sheet, stone wool insulation
• Fully enclosed panels
• Fully demountable casing
• Multi-section blocks to reduce site assembly time
• Stainless steel casing available as a standard alternative
• Painted casing available as an option

Applications

Nuclear sites

General

Whether sports cars, sedans, vans, or utilities – all over the world, millions of motor vehicles have one thing in common: They have all been through the high-tech production plants.
Airchal is a reliable partner to our customers when it comes to sharing our extensive knowledge of the industry and engineering know-how for air treatment.

Design

• 50-75 mm thick double-skin, rigid sheet, stone wool insulation
• Fully enclosed panels
• Fully demountable casing
• Multi-section blocks to reduce site assembly time

• Operational and process safety
• Energy efficiency
• Precision of thermal air-handling
• Low operating costs due to optimised fan units
• Minimised pressure losses

Applications

• Paint tunnels
• Production halls
• Battery manufacturers

General

Everyone knows offshore wind turbines have to operate under exceptionally harsh conditions. What is less well known is how much the conditions inside such wind turbines can be improved by managing the humidity in the air and extracting sea moisture.

Design

•  50-75 mm thick double-skin, rigid sheet, stone wool insulation
•  Fully enclosed panels
•  Fully demountable casing
•  Multi-section blocks to reduce site assembly time

Applications

• Engine room

AIRCHAL offers a complete range for all Marine, Oil & Gas ventilation needs.

The high specification Air Handling Unit and Fans ranges with all of the functional sections needed to meet any air handling or extracting requirement.
AIRCHAL Air Handling Unit offers flexibility of function, size and process while the CC Clean Concept is a compact unit based on a new design platform specifically for the needs of this industry. That means we control quality, performance & accomplishment of the entire unit to ensure fast installation and good service.

Design

•  50-75 mm thick double-skin, rigid sheet, stone wool insulation
•  Fully enclosed panels
•  Fully demountable casing
•  Multi-section blocks to reduce site assembly time
• Corrosion resistant components designed for the maritime environment.
• Stainless steel casing available as a standard alternative.
• Painted casing available as an option.
• Taylor made marine functions.

• Client-specific application in compliance with process requirements
• High corrosion resistance

Applications

• Cruise Ships
• Ferries Ships
• Cargo and Naval Ships
• Products for Marine and Offshore